Hot Air Gun / Heat Gun

Description

CONTROL THE BLOW

There are two levels of blow force to support your needs flexibly.

CONTROL THE HEAT
There is a rotary control on the back of the hot gun / heat gun to determine the level of heat you want, with the rotary control, you can adjust with precision, not limited to only a few options.

CONTROL THE DIRECTION
Including additional funnel to generate more controlled heat blow for use which requires precision.

SO HOT

The heat from the hot gun / heat gun is really hot so the outer layer is given some distance from components inside in order to minimize heat transfer and prevent damage to the outer layer.

HOT AIR GUN / HEAT GUN

With 6 months warranty*, believed by hundreds of users since 2014.*Not including heater element.

Still in doubt? Click on the image below to buy in Tokopedia with escrow facilities, very secure

You also can see the goods first and buy directly at our store. See our store locations at contact page

How to Use
1. Plug it into electricity
2. Select the level of force gusts in the grip, high or low
3. Feel the heat, if necessary, adjust the temperature by turning the control at the rear of the hot gun / heat gun .
4. Direct it to the target material.

Tips
1. Leave a gap of at least 10 cm from material, do not get too close.
2. Direct it to the material obliquely / laterally 45 degrees, do not set perpendicularly.
2 points above are suggested so the heat is not reflected from the material back into the tool so that your hot gun/ heat gun last longer.